DS200KLDBG1ABC|The key /LED display panel is manufactured by General Electric
The DS200KLDBG1ABC is a GE component used in the Mark V Speedtronic system. The Mark V was one of the last Speedtronic systems used to control gas or steam turbines. It is a flexible microprocessor-based control system with a TMR architecture designed with built-in diagnostic and online maintenance capabilities. GE no longer sells the DS200KLDBG1ABC, but it can be found through AX Control, either as a refurbished unit or as a way to liquidate surplus (newly used) inventory. Please note that DS200 series boards are older devices and do not have updated firmware or components; If your system needs these updates, check out similar boards in the DS215 series.
Hardware tips and specifications
The DS200KLDBG1ABC is used as a display board. It is a large rectangular plate with only a few well-spaced components. This consists of 32 vertical optical components, eight in each row placed in four rows in the lower right quadrant of the board. An integrated circuit and resistor network array are placed between these lights. More integrated circuits are clustered in the lower left corner, including a field-programmable gate array and at least one oscillating chip. The DS200KLDBG1ABC board has multiple board connectors, including two vertical pin elements. The board has two jumper switches. Various capacitors, diodes and resistors can also be used in the assembly of this DS200KLDBG1ABC product; Hardware components of this type are available for a variety of overpressure limiting and consumption purposes. The top of the board consists of seven LED displays. These displays are designed for digital display and use 16 segments of numbers. The board is marked with codes such as C-ESS and 6BA01. The corners and edges of the board are drilled to allow installation. For more information, refer to technical support products such as data sheets or user guides.
The previously included DS200KLDBG1ABC hardware component and component specification information is only reminiscent of this thorough visual inspection of the DS200KLDBG1ABC printed circuit board, Because the DS200KLDBG1ABC PCB larger Mark V turbine control system series is not well documented in the instructional materials available on the Internet. With this in mind, the DS200KLDBG1ABC feature product number has acquired new importance in this context as it displays many of the hardware details of the DS200KLDBG1ABC product in a separate feature naming block, starting with the DS200 series label, The DS200KLDBG1ABC PCB has dual naming responsibilities. DS200KLDBG1ABC Features The DS200 Series label at the beginning of the product number indicates the original manufacturing location of the DS200KLDBG1ABC PCB and its normal style Mark V Series printed board assembly. In the DS200KLDBG1ABC functional product number, this dual-function family label is followed by the KLDB Functional Product abbreviation, which exists as a functional shorthand alternative to the DS200KLDBG1ABC functional product number. Some of the additional DS200KLDBG1ABC Key/LED display board information stored in its specially developed DS200KLDBG1ABC product number includes the normal style PCB coating of the DS200KLDBG1ABC PCB, its first set of Mark V Series product groupings, and more. Finally, there is its complete revision table, including two feature revisions and one illustration configuration revision.
FAQ about DS200KLDBG1ABC
Are the three important revisions of this DS200KLDBG1ABC Key/LED Dispay Board considered backward compatible?
Nooooo. Only the first two product revisions of this DS200KLDBG1ABC product offering are backward compatible because they are both functional styles of the product revisions.
What does the normal PCB coating style for this DS200KLDBG1ABC PCB include?
The common PCB coating applied to the substrate of this DS200KLDBG1ABC product is a thick layer of daily wear protection that wraps and protects individual DS200KLDBG1ABC PCB hardware components on a function-first basis.